Proxim AP-2000 Security Profile Table, Configuring a Security Profile with WEP Security Mode

Using the Command Line Interface (CLI)

Security Profile Table

The Security Profile Table allows you to configure security profiiles. A maximum of 16 security profiles are supported per wireless interface.

Each security profile can be enable and configure one or more security modes (None Secure Station, WEP Station, 802.1x Station, WPA Station, WPA-PSK Station). The WEP/PSK parameters are separately configurable for each security mode.

Name	Type	Values	Access	CLI Parameter
Security Profile Table	Table	N/A	R	secprofiletbl
Table Index	Integer	1.1 to 5.5	R	index
Security Mode	Integer	nonsecsta	R	secmode
		wepsta
		802.1xsta
		wpasta
		wpapsksta
Authentication Mode	Integer	none	RW	authmode
		802.1x
		radius
		acl
		psk
Cipher	Integer	none	R	ciphersuite
		wep
		tkip
		aes
Encryption Key 1	Integer	User defined	RW	secprofileencryptkey1
Encryption Key 2	Integer	User defined	RW	secprofileencryptkey2
Encryption Key 3	Integer	User defined	RW	secprofileencryptkey3
Encryption Key 4	Integer	User defined	RW	secprofileencryptkey4
Encryption Transmit Key	Integer	1-4	RW	encryptkeytx
Encryption Key Length	Integer		RW	encryptkeylength
Rekey Interval	Integer		RW	rekeyint
WPA PSK Value	Integer		RW	pskkey
WPA PSK Pass Phrase	Integer		RW	passphrase
RADIUS EAP Profile	Integer		RW	radeapprofile

Command Syntax and Examples of Configuring Security Profiles:

Configuring a Security Profile with Non Secure Security Mode

set secprofiletbl <index> secmode nonsecure status enable

Example: set secprofiletbl 2 secmode nonsecure status enable

Configuring a Security Profile with WEP Security Mode

set secprofiletbl <index> secmode wep encryptkey0 <value> encryptkeylength <vakue> encryptkeytx <value> status enable

Example: set secprofiletbl 3 secmode wep encryptkey0 12345 encryptkeylength 1 encryptkeytx 0 status enable

Configuring a Security Profile with 802.1x Security Mode

set secprofiletbl <index> secmode 802.1x rekeyint 900 status enable

Example: set secprofiletbl 4 secmode 802.1x rekeyint 900 status enable

Configuring a Security Profile with WPA Security Mode

set secprofiletbl <index> secmode wpa rekeyint 900 status enable

Example: set secprofiletbl 5 secmode wpa rekeyint 900 status enable

177