Proxim AP-2000 manual Configure MAC Access Control, Setup MAC Address Access Control

Using the Command Line Interface (CLI)

Configure MAC Access Control

Setup MAC (Address) Access Control

[Device-Name]>set macaclstatus enable [Device-Name]>set macacloptype <passthru, block> [Device-Name]>reboot 0

Add an Entry to the MAC Access Control Table

[Device-Name]>set macacltbl <index> macaddr <MAC Address> status enable [Device-Name]>show macacltbl

Disable or Delete an Entry in the MAC Access Control Table

[Device-Name]>set macacltbl <index> status <disable/delete> [Device-Name]>show macacltbl

NOTE

For larger networks that include multiple Access Points, you may prefer to maintain this list on a centralized location using the RADIUS parameters (see Set RADIUS Parameters).

152