Proxim AP-2000 manual Ethernet Protocol Filtering Parameters, Static MAC Address Filter Table

Using the Command Line Interface (CLI)

Filtering Parameters

Ethernet Protocol Filtering Parameters

Name	Type	Values	Access	CLI Parameter
Ethernet Filtering	Group	N/A	R	etherflt
Filtering Interface	Interface Bitmask	0 or 2 - no interfaces	RW	etherfltifbitmask
Bitmask		(disable)
		1 or 3 - Ethernet
		4 or 6 - Wireless A
		8 or 10 - Wireless B
		12 = Wireless A & B
		13 or 15 - all interfaces
		(default is 15)
Operation Type		passthru	RW	etherfltoptype
		block

Ethernet Protocol Filtering Table

Identify the different filters by using the table index.

Name	Type	Values	Access	CLI Parameter
Ethernet Protocol	Table	N/A	R	etherflttbl
Filtering Table
Table Index	N/A	N/A	R	index
Protocol Number	Octet String	N/A	RW	protonumber
Protocol Name (optional)	DisplayString		RW	protoname
Status (optional)	Integer	enable (1)	RW	status
		disable (2)
		delete (3)

NOTE

The filter Operation Type (passthru or block) applies only to the protocol filters that are enabled in this table.

NOTE

The AP requires a reboot for changes to the Ethernet Protocol Filtering Table to take effect.

Static MAC Address Filter Table

Name	Type	Values	Access	CLI Parameter
Static MAC Address	Table	N/A	R	staticmactbl
Filter Table
Table Index	N/A	N/A	R	index
Static MAC Address on	PhysAddress	User Defined	RW	wiredmacaddr
Wired Network
Static MAC Address	PhysAddress	User Defined	RW	wiredmask
Mask on Wired Network
Static MAC Address on	PhysAddress	User Defined	RW	wirelessmacaddr
Wireless Network
Static MAC Address	PhysAddress	User Defined	RW	wirelessmask
Mask on Wireless
Network
Comment (optional)	DisplayString	max 255 characters	RW	cmt
Status (optional)	Integer	enable (default)	RW	status
		disable
		delete

170