Proxim AP-2000 manual Radius Based Management Access Parameters, SSH Parameters

Using the Command Line Interface (CLI)

RADIUS Based Management Access Parameters

The RADIUS Based Management Access parameters allow you to enable HTTP or Telnet Radius Management Access, enable or disable local user access, and configure the local user password.

The default local user ID is root and the default local user password is public. “Root” cannot be configured as a valid user for RADIUS based management access when local user access is enabled.

Name	Type	Values	Access	CLI Parameter
Radius Local User Status	Integer	Enable	RW	radlocaluserstatus
		Disable
Radius Local User Password	DisplayString	User Defined	RW	radlocaluserpasswd
HTTP Radius Management	Integer	Enable	RW	httpradiusmgmtaccess
Access		Disable
Telnet Radius Management	Integer	Enable	RW	telradiusmgmtaccess
Access		Disable

SSH Parameters

The following commands enable or disable SSH and set the SSH host key.

Name	Type	Values	Access	CLI Parameter
SSH Status	Integer	Enable	RW	sshstatus
		Disable
SSH Public Host Key Fingerprint	DisplayString	User Defined	RW	sshkeyfprint
SSH Host Key Status	Integer	Create	RW	sshkeystatus
		Delete

The AP SSH feature, open-SSH, confirms to the SSH protocol, and supports SSH version 2.

The following SSH clients have been verified to interoperate with the AP’s server. The following table lists the clients, version number, and the website of the client.

Clients	Version	Website
OpenSSH	V3.4-2	http://www.openssh.com
Putty	Rel 0.53b	http://www.chiark.greenend.org.uk
Zoc	5.00	http://www.emtec.com
Axessh	V2.5	http://www.labf.com

For key generation, only the OpenSSH client has been verified.

168