Proxim AP-2000 manual Alarms, Groups, Configuration Trap Group

Performing Advanced Configuration

Alarms

This tab has three sub-tabs.

–Groups

–Alarm Host Table

–Syslog

–Rogue Access Point Detection (RAD)

Groups

The AP can be configured to generate and send alarms/notifications/traps as version 1 or a version 2c. Use the drop-down menu to select SNMP alarm type.

There are seven alarm groups that can be enabled or disabled via the Web interface. Place a check mark in the box provided to enable a specific group. Remove the check mark from the box to disable the alarms. Alarm Severity Levels vary.

Figure 4-17 Syslog Configuration Screen

•	Configuration Trap Group
	Trap Name	Description
	DNS IP Address not Configured	oriTrapDNSIPNotConfigured
	RADIUS Authentication not Configured	oriTrapRADIUSAuthenticationNotConfigured
	RADIUS Accounting not Configured	oriTrapRADIUSAccountingNotConfigured
	Duplicate IP Address Encountered	oriTrapDuplicateIPAddressEncountered
	VLAN ID Invalid Configuration	oriTrapVLANIDInvalidConfiguration
	Auto Configuration Failure	oriTrapAutoConfigFailure
	CLI Configuration Execution Failure	oriTrapBatchExecFailure
	CLI Configuration Execution Start	oriTrapBatchFileExecStart
	CLI Configuration Execution End	oriTrapBatchFileExecEnd

69