Proxim AP-2000 manual Wireless Interface SSID/VLAN/Profile Parameters

Using the Command Line Interface (CLI)

Wireless Interface SSID/VLAN/Profile Parameters

The Wireless Interface SSID table manages the SSID/VLAN pairs, and the Security Profile and RADIUS Profiles associated to the VLAN

NOTE

The ability to configure up to 16 VLAN/SSID pairs and to configure security and RADIUS profiles per SSID is available only for 802.11b/g APs and 802.11a Upgrade Kit APs.

802.11b APs do not support multiple VLAN/SSID pairs. APs with the 802.11a card support multiple VLAN/SSID pairs, but do not support the security profile per SSID capability.

Name	Type	Values	Access	CLI Parameter
Wireless Interface SSID	Table	N/A	R	wifssidtbl
Table
Table Index	Integer	Primary Wireless	R	index
		Interface = 3
		Secondary Wireless
		Interface = 4
Table Index	Integer	1 - 16 (SSID index)	R	ssidindex
SSID	DisplayString	0 - 32 characters	RW	ssid
VLAN ID	VlanId	-1 - 4094	RW	vlanid
Table Row Status	RowStatus	Enable	RW	status
		Disable
SSID Authorization	Integer	Enable	RW	ssidauth
Status per VLAN		Disable
RADIUS Accounting	Integer	Enable	RW	acctstatus
Status per VLAN		Disable
MAC ACL Status per	Integer	Enable	RW	macaclstatus
VLAN		Disable
Security Profile	Integer	1-32	RW	secprofile
RADIUS MAC Profile	Integer		RW	radmacprofile
RADIUS EAP Profile	Integer		RW	radeapprofile
RADIUS Accounting	Integer		RW	radacctprofile
Profile
Deny Non Encrypted	Integer	Enable	R/W	denynonencrypted
Data		Disable

Wireless Distribution System (WDS) Security Table Parameters

The WDS Security Table manages WDS related security objects.

Name	Type	Values	Access	CLI Parameter
WDS Security Table	Table	N/A	R	wdssectbl
Table Index	Integer	Primary Wireless	R	index
		Interface = 3
		Secondary Wireless
		Interface = 4
Security Mode	Integer	none, wep	RW	secmode
Encryption Key 0	WEPKeyType	N/A	WO	encryptkey0

165