Proxim AP-2000 Auto Configuration Parameters, Tftp Server Parameters, IP Access Table Parameters

Using the Command Line Interface (CLI)

Auto Configuration Parameters

These parameters relate to the Auto Configuration feature which allows an AP to be automatically configured by downloading a specific configuration file from a TFTP server during the boot up process.

Name	Type	Values	Access	CLI Parameter
Auto Configuration	Group	N/A	R	autoconfig
Auto Configuration	Integer	enable (default)	RW	autoconfigstatus
Status		disable
Auto Config File Name	DisplayString	User Defined	RW	autoconfigfilename
Auto Config TFTP	IpAddress	User Defined	RW	autoconfigTFTPaddr
Server IP Address

TFTP Server Parameters

These parameters relate to upload and download commands.

When a user executes an upload and/or download Command, the specified arguments are stored in TFTP parameters for future use. If nothing is specified in the command line when issuing subsequent upload and/or download commands, the stored arguments are used.

Name	Type	Values	Access	CLI Parameter
TFTP	Group	N/A	R	tftp
TFTP Server IP Address	IpAddress	User Defined	RW	tftpipaddr
TFTP File Name	DisplayString	User Defined	RW	tftpfilename
TFTP File Type	Integer	img	RW	tftpfiletype
		config
		bootloader
		sslcertificate
		sslprivatekey
		sshprivatekey
		sshpublickey
		clibatchfile (CLI Batch File)
		cbflog (CLI Batch Error Log)

IP Access Table Parameters

When creating table entries, you may either specify the argument name followed by argument value or simply entering the argument value. When only the argument value is specified, then enter the values in the order depicted by the following table. CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that can be omitted is the “comment” argument.

Name	Type	Values	Access	CLI Parameter
IP Access Table	Table	N/A	R	mgmtipaccesstbl
Table Index	Integer	User Defined	N/A	index
IP Address	IpAddress	User Defined	RW	ipaddr
IP Mask	IpAddress	User Defined	RW	ipmask
Comment (optional)	DisplayString	User Defined	RW	cmt
Status (optional)	Integer	enable (default)	RW	status
		disable
		delete

169