Proxim AP-2000 manual Dhcp Server Parameters, Dhcp Server table for IP pools

Using the Command Line Interface (CLI)

DHCP Server Parameters

Name	Type	Values	Access	CLI Parameter
DHCP Server	Group	N/A	R	dhcp
DHCP Server Status	Integer	enable (1) (default)	RW	dhcpstatus
		disable (2)
		delete (3)
Gateway IP Address	IpAddress	User Defined	RW	dhcpgw
Primary DNS IP Address	IpAddress	User Defined	RW	dhcppridnsipaddr
Secondary DNS IP	IpAddress	User Defined	RW	dhcpsecdnsipaddr
Address
Number of IP Pool Table	Integer32	N/A	R	dhcpippooltblent
Entries

NOTE

The DHCP Server (dhcpstatus) can only be enabled after a DHCP IP Pool table entry has been created.

DHCP Server table for IP pools

Name	Type	Values	Access	CLI Parameter
DHCP Server IP Address	Table	N/A	R	dhcpippooltbl
Pool Table
Table Index	Integer	User Defined	N/A	index
Start IP Address	IpAddress	User Defined	RW	startipaddr
End IP Address	IpAddress	User Defined	RW	endipaddr
Width	Integer	User Defined	RW	width
Default Lease Time	Integer32	3600-	RW	defleasetm
(optional)		86400 sec (default)
Maximum Lease Time	Integer32	3600-	RW	maxleasetm
(optional)		86400 sec (default)
Comment (optional)	DisplayString	User Defined	RW	cmt
Status (optional)	Integer	enable (1)	RW	status
		disable (2)
		delete (3)

NOTE

Set either End IP Address or Width (but not both) when creating an IP address pool.

160