Proxim AP-2000 manual Telnet Parameters, Serial Port Parameters

Using the Command Line Interface (CLI)

HTTP Password	DisplayString	User Defined	W	httppasswd
		max 64 characters
HTTP Port	Integer	User Defined	RW	httpport
		Default = 80
Help Link	DisplayString	User Defined	RW	httphelplink
SSL Status	Integer	Enable/Disable	RW	sslstatus
SSL Certificate	DisplayString	User Defined	Write-only	sslpassphrase
Passphrase

NOTE

The default path for the Help files is C:/Program Files/ORiNOCO/AP/HTML/index.htm. (Use the forward slash character ("/") rather than the backslash character ("\") when configuring the Help Link location.) The AP Help information is available in English, French, German, Italian, Spanish, and Japanese.

Telnet Parameters

Name	Type	Values	Access	CLI Parameter
Telnet	Group	N/A	R	telnet
Telnet Management	Interface Bitmask	0 or 2 - no interfaces	RW	telifbitmask
Interface Bitmask		(disable)
		1 or 3 - Ethernet
		4 or 6 - Wireless A
		8 or 10 - Wireless B
		12 = Wireless A & B
		13 or 15 - all interfaces
		(default is 15)
Telnet Port	Integer	User Defined	RW	telport
		23 (default)
Telnet Login Inactivity	Integer	1 – 300 seconds	RW	tellogintout
Time-out		30 sec (default)
Telnet Session Idle	Integer	1 - 900 seconds	RW	telsessiontout
Time-out		900 sec (default)

Serial Port Parameters

Name	Type	Values	Access	CLI Parameter
Serial	Group	N/A	R	serial
Baud Rate	Integer	2400, 4800,	RW	serbaudrate
		9600 (default),
		19200, 38400, 57600
Data Bits	Integer	8	R	serdatabits
Parity	Integer	none	R	serparity
Stop Bits	Integer	1	R	serstopbits
Flow Control	Value	none (default)	RW	serflowctrl
		xonxoff

167