Proxim AP-2000 manual SSID/VLAN Edit Entries Screen Vlan Protocol Enabled

Performing Advanced Configuration

Figure 4-34 SSID/VLAN Edit Entries Screen (VLAN Protocol Enabled)

4.Enter a unique Network Name (SSID), between 1 and 32 characters. This parameter is mandatory.

5.Enter a unique VLAN ID. This parameter is mandatory.

–You must specify a unique VLAN ID for each SSID on the interface. A VLAN ID is a number from -1 to 4094. A value of -1 means that an entry is “untagged.”

–You can set the VLAN ID to “-1” or “untagged” if you do not want clients that are using a specific SSID to be members of a VLAN workgroup. Only one “untagged” VLAN ID is allowed per interface.

–The VLAN ID must match an ID used by your network; contact your network administrator if you need assistance defining the VLAN IDs.

6.If editing an entry, enable or disable the VLAN using the VLAN Status drop-down menu. If adding, this drop-down menu will not appear.

7.Enable or disable the SSID Authorization status from the drop-down menu.

SSID Authorization is the RADIUS based authorization of the SSID for a particular client. The authorized SSIDs are sent as the tunnel attributes.

8.Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status drop-down menu.

9.Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the RADIUS Authentication Status drop-down menu.

10.Enable or disable MAC Access Control List status on the VLAN/SSID under the MAC ACL Status drop-down menu.

11.Enter the Rekeying Interval in seconds. The default interval is 900 seconds.

12.Enter the Security Profile used by the VLAN in the Security Profile field.

98