Proxim AP-2000 manual System Parameters, Name Type Values Access CLI Parameter

Using the Command Line Interface (CLI)

–VLAN/SSID Parameters - Enable the configuration of multiple subnetworks based on VLAN ID and SSID pairs.

–Security Profile Table - Configure Security Profiles that define allowed security modes (wireless clients), and encryption and authentication mechanisms.

•Other Parameters

–IAPP Parameters - Enable or disable the Inter-Access Point Protocol.

–SpectraLink VoIP Parameters (802.11b and bg Modes Only) - Enable or disable SpectraLink Voice over IP feature.

System Parameters

Name	Type	Values	Access	CLI Parameter
System	Group	N/A	R	system
Name	DisplayString	User Defined	RW	sysname
Location	DisplayString	User Defined	RW	sysloc
Contact Name	DisplayString	User Defined	RW	sysctname
Contact E-mail	DisplayString	User Defined	RW	sysctemail
Contact Phone	DisplayString	User Defined	RW	sysctphone
		max 254 characters
FLASH Backup Interval	Integer	0 - 65535 seconds	RW	sysflashbckint
Flash Update		0	RW	sysflashupdate
		1
System OID	DisplayString	N/A	R	sysoid
Descriptor	DisplayString	System Name, flash	R	sysdescr
		version, S/N, bootloader
		version
Up Time	Integer	dd:hh:mm:ss	R	sysuptime
		dd – days
		hh – hours
		mm – minutes
		ss – seconds
Emergency Restore to defaults		Resets all parameters to	RW	sysresettodefaults
		default factory values		Note: You must enter the
				following command twice to
				reset to defaults:
				set sysresettodefaults 1

158