Proxim AP-2000 Storm Threshold Parameters, Intra BSS Subscriber Blocking, Storm Threshold Table

Using the Command Line Interface (CLI)

	Priority	Integer	0	– 255	RW	priority
			128 (default)
	Path Cost	Integer	1	– 65535	RW	pathcost
			100 (default)
	State	Integer	disable		R	state
			blocking
			listening
			learning
			forwarding
			broken
	Status	Integer	enable		RW	status
			disable
Storm Threshold Parameters
	Name	Type	Values		Access	CLI Parameter
	Storm Threshold	Group	N/A		N/A	stmthres
	Broadcast Threshold	Integer	0	– 255 packets/sec	RW	stmbrdthres
			(default is 0)
	Multicast Threshold	Integer	0	– 255 packets/sec	RW	stmmultithres
			(default is 0)
Storm Threshold Table
	Name	Type	Values		Access	CLI Parameter
	Storm Threshold Table	Table	N/A		R	stmthrestbl
	Table Index	Integer	1	= Ethernet	R	index
			3	= Wireless
	Broadcast Threshold	Integer	0	– 255 packets/sec	RW	bcast
			(default is 0)
	Multicast Threshold	Integer	0	– 255 packets/sec	RW	mcast
			(default is 0)

Intra BSS Subscriber Blocking

The following parameters control the Intra BSS traffic feature, which prevent wireless clients that are associated with the same AP from communicating with each other:

Name	Type	Values	Access	CLI
Intra BSS Traffic	Group	N/A	R	intrabss
Intra BSS Traffic	Integer	passthru (default)	RW	intrabssoptype
Operation		block

Packet Forwarding Parameters

The following parameters control the Packet Forwarding feature, which redirects wireless traffic to a specific MAC address:

Name	Type	Values		Access	CLI
Packet Forwarding MAC	Group	N/A		R	pktfwd
Address
Packet Forwarding MAC	MacAddress	User Defined		RW	pktfwdmacaddr
Address
Packet Forwarding	Integer	enable		RW	pktfwdstatus
Status		disable (default)
Packet Forwarding	Integer	0	(any) (default)	RW	pktfwdif
Interface Port		1	(Ethernet)
		2	(WDS 1)
		3	(WDS 2)
		4	(WDS 3)
		5	(WDS 4)
		6	(WDS 5)
		7	(WDS 6)

174