Proxim AP-2000 manual Syslog Messages, Following messages are supported in the AP

Performing Advanced Configuration

•Syslog Heartbeat Status: Enables or disables the sending of heartbeat messages from the AP to the configured Syslog servers.

•Syslog Heartbeat Interval: Specifies the interval (in seconds) at which Syslog Heartbeat messages are sent to the configured Syslog servers.

•Syslog Host Table: This table specifies the IP addresses of a network servers that the AP will send Syslog messages to. Click Add to create a new entry. Click Edit to change an existing entry. Each entry contains the following field:

–IP Address: Enter the IP Address for the management host.

–Comment: Enter an optional comment such as the host name.

–Status: The entry is enabled automatically when saved (so the Status field is only visible when editing an entry). Disable or delete entries by changing this field’s value.

Syslog Messages

The following messages are supported in the AP:

Message	Severity
Auto Configuration via DHCP	Informational
Auto Configuration for static IP	Informational
TFTP server IP/Config filename missing in DHCP response	Minor
AutoConfig TFTP server IP address used is <IP address>	Informational
AutoConfig filename used is <filename>	Informational
AutoConfig TFTP download failed	Minor
Image Error check, invalid image	Minor
AP Heartbeat status	Minor
Client Authentication State	Informational
Accounting	Informational
RADIUS Responses	Informational

73