Proxim AP-2000 manual History, Passwd, Reboot, Search

Using the Command Line Interface (CLI)

Figure A-8 Results of “help” CLI command

2.Complete command description and command usage can be provided by:

[Device-Name]>help <command name> [Device-Name]><command name> help

history

Shows content of Command History Buffer. The Command History Buffer stores command statements entered in the current session. To avoid re-entering long command statements, use the keyboard “up arrow” (Ctrl-P) and “down arrow” (Ctrl-N) keys to recall previous statements from the Command History Buffer. When the desired statement reappears, press the Enter key to execute, or you may edit the statement before executing it.

[Device-Name]> history

passwd

Changes the CLI Password.

[Device-Name]>passwd oldpassword newpassword newpassword

reboot

Reboots Access Point after specified number of seconds. Specify a value of 0 (zero) for immediate reboot.

[Device-Name]> reboot 0 [Device-Name]> reboot 30

search

Lists the parameters supported by the specified table. This list corresponds to the table information displayed in the HTTP interface. In this example, the CLI returns the list of parameters that make up an entry in the IP Access Table.

[Device-Name]>search mgmtipaccesstbl

Figure A-9 Results of “search mgmtipaccesstbl” CLI command

138