Proxim AP-2000 manual Security Parameters, Radius Parameters, MAC Access Control Parameter

Using the Command Line Interface (CLI)

NOTE

The Wireless Distribution System (WDS) feature is not available for 802.11a or 802.11b/g APs at this time.

Security Parameters

MAC Access Control Parameter

Name	Type	Values	Access	CLI Parameter
MAC Address Control	Group	N/A	R	macacl
Status	Integer	enable	RW	macaclstatus
		disable (default)
Operation Type	Integer	passthru (default)	RW	macacloptype
		block

MAC Access Control Table

Name	Type	Values	Access	CLI Parameter
MAC Address Control	Table	N/A	R	macacltbl
Table
Table Index	N/A	N/A	R	index
MAC Address	PhysAddress	User Defined	RW	macaddr
Comment (optional)	DisplayString	User Defined	RW	cmt
		max 254 characters
Status (optional)	Integer	enable (default)	RW	status
		disable
		delete

RADIUS Parameters

General RADIUS Parameters

Name	Type	Values	Access	CLI Parameter
RADIUS	Group	N/A	R	radius
Client Invalid Server	Counter32	N/A	R	radcliinvsvradd
Address

RADIUS Server Configuration Parameters

NOTE

Use a server name only if you have enabled the DNS Client functionality. See DNS Client for RADIUS Name Resolution.

Name	Type	Values	Access	CLI Parameter
RADIUS Authentication	Table	N/A	R	radiustbl
Table Index (Profile	Integer	N/A	R	index
Index)
Primary/Secondary	Integer	Primary (1)	R	subindex
Index		Secondary (2)
Status	Integer	Enable	RW	status
		Disable
Server Address Format	Integer	Ipaddr	RW	seraddrfmt
		Name

175