Proxim AP-2000 manual Proxy ARP Parameters, IP ARP Filtering Parameters, Broadcast Filtering Table

Using the Command Line Interface (CLI)

Proxy ARP Parameters

	Name	Type	Values	Access	CLI Parameter
	Proxy ARP	Group	N/A	R	parp
	Status	Integer	enable	RW	parpstatus
			disable (default)
IP ARP Filtering Parameters

	Name	Type	Values	Access	CLI Parameter
	IP ARP Filtering	Group	N/A	R	iparp
	Status	Integer	enable	RW	iparpfltstatus
			disable (default)
	IP Address	IpAddress	User Defined	RW	iparpfltipaddr
	Subnet Mask	IpAddress	User Defined	RW	iparpfltsubmask
Broadcast Filtering Table

	Name	Type	Values	Access	CLI Parameter
	Broadcast Filtering	Table	N/A	R	broadcastflttbl
	Table
	Index	Integer	1-5	N/A	index
	Protocol Name	DisplayString	N/A	R	protoname
	Direction	Integer	ethertowireless	RW	direction
			wirelesstoether
			both (default)
	Status	Integer	enable	RW	status
			disable (default)
TCP/UDP Port Filtering

The following parameters are used to enable/disable the Port filter feature.

Name	Type	Values	Access	CLI
Port Filtering	Group	N/A	R	portflt
Port Filter Status	Integer	enable (default)	RW	portfltstatus
		disable

TCP/UDP Port Filtering Table

The following parameters are used to configure TCP/UDP Port filters.

Name	Type	Values	Access	CLI
Port Filtering Table	Table	N/A	R	portflttbl
Table Index	N/A	User Defined	R	index
		(there are also 4
		pre-defined indices, see
		Port Number below for
		more information)
Port Type	Octet String	tcp	RW	porttype
		udp
		tcp/udp

171