E
N
35
To Select The External Input Mode
To record external audio and video signals;
1Press the remote control's NUMBER key "0".
2Press AV/S SELECT on the front of the recorder to select the appropriate external input mode. ● Pressing AV/S SELECT rotates the input mode as follows:
When using rear panel input connectors:
Mode
AV/S
SELECT
Connector | (on display panel) | (on screen) | |
|
|
|
|
|
|
|
|
AV1 IN/OUT | AUX 1 | ||
AV2 IN/DECORDER | AUX 2 | ||
|
|
| (S) |
S IN, AUDIO IN L and R | [S] | ||
When using front panel input connectors:
|
| Mode | |
Connector | (on display panel) | (on screen) | |
VIDEO, AUDIO |
| ||
L and R | |||
|
|
NOTES:
●To record input signals from the AV2 IN/DECODER connector, set "AV2 SELECT to "AV2" (see below).
●Connections made to the front panel Video and Audio inputs automatically override the rear panel AUDIO/VIDEO input connection. If you wish to edit with another machine connected to the rear input connector, make sure that there is nothing connected to the front connectors.
●Use the L connector for monaural connection.
AV2 SELECT Setting
1Press MENU twice to access the Main Menu screen.
2 Press PUSH JOG %Þto move the highlight bar (pointer) to "MODE SET", then press OK. | MODE SET | |||
3 Press PUSH JOG %Þto move the highlight bar (pointer) to "AV2 SELECT". | AUTO TIMER | : OFF | ||
4 Press PUSH JOGÞto move the highlight bar (pointer) to your choice: | ||||
O. S. D. | : ON | |||
: To use this recorder as the recording deck with the player connected to the | : AUTO | |||
| AV2 IN/DECODER connector. | EDIT | : OFF | |
| AV2 SELECT | : AV2 | ||
TIME SCAN | : ON | |||
5 Press MENU to return to normal screen. | AUDIO |
| ||
|
| |||
● If you have a decoder, be sure to set "AV2 SELECT" back to "DECODER" after editing. | [5°] = [5] : AV2/DECODER | |||
[MENU] : EXIT |
| |||
●If you're not using a decoder, leave "AV2 SELECT" set to "AV2".
●The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT" back to "DECODER".
