JVC HR-S9400EH Buttons remain lit Start +/-, Stop +/-, Date +, Press TV Prog +, Pdc/Vps

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

TIMER

		2		DAILY
	1	2
				3
	4	5		6
:PDC/VPS	7	8		9	WEEKLY
					TIMER
		0
					4
					TV PROG+/–
SP/LP
			DATE+/–
			3		OK
	1

Satellite Tuner Users

To timer-record a satellite broadcast using Regular Timer Programming:

●Before you start step 1, be sure to set the recorder's input mode to "AUX2" (☞ pg. 35). Do NOT change the input mode until the selected programme has been timer- recorded. In step 6, you have to select "AUX2" as well.

●Before the selected programme begins, select the appropriate channel on the satellite tuner, and then set the tuner's timer. If your satellite tuner does not have a timer, leave the unit's power on.

E

N

31

5

ENTER PROGRAMME DATE

Press DATE +/–. (The current date appears on screen.

The date you enter appears in its place.)

● If you are using the Illumi-Guide feature, the following

buttons remain lit: START +/–, STOP +/–, DATE +/–,

TV PROG +/– and MENU.

6

ENTER CHANNEL POSITION

Press TV PROG +/–.

– P1 –

START

STOP

21:00

=

22:00

SP

ON

DATE

TV PROG

25.12

1

1

ARD

[+/–] =

[MENU] : EXIT

SP

IMPORTANT

Be sure to confirm the setting of PDC/VPS recording.

	● If "	ON" is displayed on the screen or "		" is lit
	on the display panel, PDC/VPS is set to ON.
	● If "	OFF" is displayed on the screen or "		" is
	not lit on the display panel, PDC/VPS is set to OFF.
	To change the setting, press		: PDC/VPS
	(NUMBER key "7").
	☞ "PDC/VPS Recording" on page 33.
	● If you are using the Illumi-Guide feature, OK blinks
	when the following buttons are lit: START +/–, STOP
	+/–,DATE +/–,TV PROG +/– and MENU.
	SET TAPE SPEED
7 Press SP/LP ( ) to set the tape speed.
8	RETURN TO NORMAL SCREEN
	After confirming all information is correct, press OK
	and the normal screen appears.
	● Repeat steps 1–8for each additional programme.
	ENGAGE RECORDER’S TIMER
	MODE
9 Press TIMER. The recorder turns off automatically.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 32).