JVC HR-S9400EH Random As- semble Editing, Prepare for Editing, Load Source Cassette

42ENEDITING(cont.)

Random As- semble Editing

Set the PAL/MESECAM switch to the appropriate position.

☞pg. 16

PAUSE/

R.A. EDIT

Player Your recorder

			8
•• • • • ••		•• • • • ••
• •	• •	• •	• •

Audio signal Video signal

				Another recorder
			(w/PAUSE connector)
Recorder
				REMOTE		Mini-plug Cable
						(Not provided)
				PAUSE
	IN/OUT		START	IME	SCAN
							SHUTTLE
								8
				PLAY
•• • • • •• •• • • • ••
• • • •	• •	• •
							STOP	OGJ
CANCEL				0			4
				PLAY

This function makes it easier to create edited videos when your video recorder is used as the source player in combination with another JVC video recorder equipped with a Remote PAUSE Connector. You can pre-program up to 8 scenes or “cuts” for automatic editing in the sequence you have specified.

You can also perform Random Assemble Editing with a second non-JVC recorder. ☞ pg. 43

MAKE CONNECTIONS

1 Connect your recorder’s AV1 IN/OUT connectors to the VIDEO IN and AUDIO IN connectors on the recording deck, and connect your recorder’s PAUSE/R.A. EDIT connector to the PAUSE connector on the recording deck.

● If the recording deck doesn’t have a PAUSE connec- tor, connect to the R.A. EDIT connector instead.

● The Mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

PREPARE FOR EDITING

2 Insert the cassette to be recorded on into the recorder and set the recorder's input mode.

LOAD SOURCE CASSETTE

3 Insert the source cassette into your recorder.

SET EDIT MODE

4 See "Editing Mode Setting" on page 34.

START SOURCE PLAYBACK

5 Press PLAY.

ACCESS MAIN MENU

SCREEN

6 Press MENU twice.

ACCESS R.A. EDIT SCREEN

7 Press PUSH JOG %Þto move the highlight bar (pointer) to "R.A.EDIT", then press OK.

● The screen is superimposed on the video playback in step 8.

STOP

3

MENU 1

OK

PUSH JOG