JVC HR-S9400EH specifications Select Channel to, Watch, SET Counter Display, Reset Counter

Models: HR-S9400EH HR-S9400E

1 64
Download 64 pages 43.38 Kb
Page 24
Image 24

24EN

RECORDING(cont.)

 

Record One Programme

 

Recording

If your recorder is connected to the TV via AV connection, . . .

Features

While Watching Another

. . . press TV/VCR. The recorder's VCR indicator and the TV

 

 

broadcast being recorded disappear.

 

 

 

 

SELECT CHANNEL TO

 

 

 

 

WATCH

 

 

 

 

Once recording is in progress, all you need to do is to

 

 

 

 

set the channel controls on the TV for the station you

 

 

 

8

1 wish to view.

•• • • • •• •• • • • ••

 

The programme selected with the TV’s channel

• • • •

 

RECORD

 

controls appears on the TV screen while the one

• •

 

 

 

 

 

 

selected with the recorder's TV PROG buttons is

 

 

 

 

recorded on the tape.

 

 

 

 

If a decoder is connected to the recorder (pg. 45),

 

 

 

 

you can select a scrambled channel as well with the

 

 

 

 

TV channel controls.

DISPLAY

2

1 2 3

4

5

6

7 8 9

Elapsed Recording Time Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

Press DISPLAY until a counter reading appears on the

1 dispay panel.

C.RESET

04

TV PROG

RESET COUNTER

Press C. RESET before starting recording or playback.

AUDIO MONITOR

 

TV/VCR

3

OK

MENU

1

PUSH JOG

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press DISPLAY until the time remaining on the tape appears.

By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.

*channel position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.

2

The counter is reset to “0:00:00” and shows the exact

elapsed time as the tape runs.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "" blinks and 0:30 appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.

Page 24
Image 24
JVC HR-S9400EH specifications Select Channel to, Watch, SET Counter Display, Reset Counter, Display Remaining Time