52ENTUNERSET(cont.)

Storing Channels Manually

Store channels that were not stored during Auto Set Up (pg. 6) or Auto Channel Set (pg. 50).

*In Australia and New Zealand, channels cannot be stored properly even though the following procedure is performed.

ACCESS MAIN MENU

1 Press MENU twice.

ACCESS CONFIRMATION

SCREEN

2 Press PUSH JOG%Þto move the highlight bar (pointer) to “MANUAL CH SET”, then press OK. The Confirma- tion screen appears.

SELECT POSITION

3 Press PUSH JOG%Þ% %until an open position in which you want to store a channel begins blinking, then press OK. The Manual Ch. Set screen appears.

INPUT CHANNEL

4 The number "01" appears blinking beneath "CH". Press the NUMBER keys to input the channel number you want to store.

For fine tuning adjustment, press PUSH JOG %until the item beneath "CH" begins blinking, then press PUSH JOG%Þ. While tuning, “F+” or “F–” appears.

If necessary, to change the band between CH(regular)

and CC(cable), press PUSH JOGÞ%until CH or CC is blinking, then press PUSH JOG %Þ to select the band.

When storing a channel that sends scrambled broadcasts, press PUSH JOG %until "OFF" (Decoder setting) blinks, then press PUSH JOG%Þ to set "DECODER" to "ON" ("OFF" is the default setting).

 

ENTER NEW CHANNEL

5

INFORMATION

Press OK and the Confirmation screen appears.

 

Repeat steps 3 through 5 as necessary.

 

 

 

6

CLOSE CONFIRMATION SCREEN

Press MENU.

 

To input the station name, see page 53.

To change positions, see "Change Station Channel

 

Position" (at right).

When Receiving A Scrambled Broadcast

Make sure that "AV2 SELECT" is set to "DECODER" (pg. 35). 1– Perform steps 1 and 2 above.

2– Press PUSH JOG

Þ%to select the position of the

 

channel broadcasting the scrambled programmes, then

press OK three times.

3– Press PUSH JOG %until "OFF (Decoder setting)" begins blinking, and set it to "ON" by pressing PUSH JOG%Þ.

4– Press OK to access the Confirmation screen.

Repeat steps 2 – 4 for each additional channel. 5– Press MENU.

Perform steps 1 and 2 of the previous procedure to access the Confirmation screen before continuing.

Delete A Channel

1

 

SELECT ITEM

 

Press PUSH JOG %%until the item you want to

delete begins blinking.

2

 

DELETE CHANNEL

 

Press CANCEL.

 

 

 

The item directly beneath the cancelled one moves

 

up one line.

 

 

Repeat steps 1 and 2 as necessary.

 

 

 

 

 

CLOSE CONFIRMATION

3

 

SCREEN

 

Press MENU.

 

 

 

Change Station Channel Position

1

 

SELECT ITEM

 

Press PUSH JOG%Þ%%until the item you want to

move begins blinking. Then press OK and the station

name (ID) and its channel (CH) number begin blinking.

2

 

SELECT NEW POSITION

 

Press PUSH JOG%Þ%%to move the station to the new

channel position, then press OK.

Example: If you moved the station in position 3 to

 

position 7, the stations originally in positions 4–7 each

 

move up one space.

 

 

 

 

 

Repeat steps 1 and 2 as necessary.

 

 

 

 

 

CLOSE CONFIRMATION

3

 

SCREEN

 

Press MENU.

 

 

 

Page 52
Image 52
JVC HR-S9400EH specifications Select Item, Delete Channel, Close Confirmation, Select NEW Position, EN Tuner SET