JVC HR-S9400EH Select Language, Perform Auto SET UP, Language Code for the HR-S9400E

3

4

If you are referring to the on-screen display

Press PUSH JOG%Þ to move the highlight bar (pointer) to your country's name.

●If you have selected a country other than BELGIUM or SUISSE, go to step 4.

●If you have selected BELGIUM or SUISSE, go to step 3.

SELECT LANGUAGE

Press OK. the Language Set display appears on the front display panel and/or on the screen.

If you are referring to the front display panel

Press PUSH JOG%Þ to select your language code referring to the chart in the left column.

(Ex.) DEUTSCH is selected for SUISSE
International telephone	Language code
country code

If you are referring to the on-screen display

Press PUSH JOG%Þ to move the highlight bar (pointer) to the language of your choice.

For HR-S9400E	For HR-S9400EH
NEDERLANDS	NEDERLANDS
ITALIANO	CASTELLANO
FRANCAIS	FRANCAIS
DEUTSCH	DEUTSCH
ENGLISH	ENGLISH
[5°] =	[5°] =
[MENU] : ENDE	[MENU] : ENDE

PERFORM AUTO SET UP

Press OK.

"Auto" appears on the display panel and blinks; do NOT press any button on the recorder or remote control until the display panel shows the current time or "CH1" or "--:--". (Refer to box on this page.)

●Auto channel set function takes place first; it assigns automatically all receivable stations in your area.

●Auto clock set function sets the clock automatically by reading the clock setting data from a station transmitting a PDC signal while auto channel set is being performed.

●During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory, then automatically sets SHOWVIEW assigned Guide Program number for those stations according to the broadcast area.

NOTE:

In the area where no TV station transmits a PDC signal, the recorder can perform neither auto clock set nor auto Guide Program number set.

EN7

Language Code for the HR-S9400E

ENGLISH	: 01	ITALIANO	: 04
DEUTSCH	: 02	NEDERLANDS : 05
FRANCAIS	: 03
Language Code for the HR-S9400EH
ENGLISH	: 01	CASTELLANO	: 04
DEUTSCH	: 02	NEDERLANDS : 05
FRANCAIS	: 03

Auto Set Up results appear on the front display panel

● When both auto channel set and auto clock set have been completed success- fully the correct current time will be displayed.

● When auto channel set has

been completed success- fully but auto clock set has not, "CH" will be displayed.

● When neither auto channel set nor auto clock set has been completed successfully, "--:--" will be displayed.

●If Auto Set Up is completed, go to page 8.

NOTES:

●If you are using the on- screen display, the AUTO

SET screen will appear after				AUTO SET
pressing OK in step 4. As			PLEASE WAIT
Auto Set Up progresses, the
"	" mark on the screen	0	+		+	+
moves from left to right.

●If there is a power cut, or if

you press	or MENU		[MENU] : EXIT
while Auto Set Up is in
progress, Auto Set Up will		Beginning		End
be interrupted; be sure to

turn off the recorder power once and try again from step 1.