Proxim AP-2000 manual Configure Syslog, Configure Intra BSS, Configure Secure Socket Layer Https

Using the Command Line Interface (CLI)

Configure Secure Socket Layer (HTTPS)

Enabling SSL and configuring a passphrase allows encrypted Secure Socket Layer communications to the AP through the HTTPS interface.

[Device-Name]>set sslstatus <enable/disable>

The user must change the SSL passphrase when uploading a new certificate/private key pair, which will have a corresponding passphrase.

[Device-Name]>set sslpassphrase <SSL certificate passphrase>

[Device-Name]>show http

To view all HTTP configuration information including SSL.

HTTP Group Parameters

=====================

httpifbitmask	:	15
httppasswd	:	********
httpport	:	80
httphelplink	:	file:///C:/Program Files/ORiNOCO/AP2000/HTML/home.htm
httpsetupwiz	:	disable
sslstatus	:	enable
sslpassphrase	:	********

Set Telnet Session Timeouts

[Device-Name]>set tellogintout <time in seconds between 1 and 300 (default is 30)> [Device-Name]>set telsessiontout <time in seconds between 1 and 36000 (default is 900)>

Configure Serial Port Interface

NOTE

To avoid unexpected performance issues, leave Flow Control at the default setting (none) unless you are sure what this setting should be.

[Device-Name]> [Device-Name]> [Device-Name]>

set serbaudrate <2400, 4800, 9600, 19200, 38400, 57600> set serflowctrl <none, xonxoff>

show serial

Figure A-15 Result of “show serial” CLI Command

Configure Syslog

[Device-Name]>set syslogpriority <1-7 (default is 6)> [Device-Name]>set syslogstatus <enable/disable>

[Device-Name]>set sysloghbstatus <enable/disable> (default is disable) [Device-Name]>set sysloghbinterval <1 - 604800> (default is 900 seconds) [Device-Name]>set sysloghosttbl <index> ipaddr <ipaddress> cmt <comment> status <enable/disable>

Configure Intra BSS

[Device-Name]>set intrabssoptype <passthru (default)/block)>

151