Proxim manual Hardware Installation, AP-2000 with Active Ethernet

Getting Started

Hardware Installation

•AP-2000 with Active Ethernet

•AP-2000 with Power Supply

•5 GHz or AP-2000 11a Upgrade Kit

AP-2000 with Active Ethernet

1. Slide the AP module onto the mounting bracket. Make sure it is properly seated.

Figure 2-1 Insert Module into Mounting Bracket

2.Slide an 802.11b, 802.11b/g wireless card, or 802.11a card with antenna adapter (not included in the kit) into Slot A or B. NOTE: The 802.11a wireless card with antenna adapter will only fit in Slot A.

3.Slide an 802.11b or an 802.11b/g wireless card (included in the kit) into Slot A or B.

Figure 2-2 Slide a PC Card into the AP

4.Connect power to the unit from a DC injector device, such as the ORiNOCO 1-Port Active Ethernet DC Injector hub.

5.Wait for the LED indicators to turn green before proceeding.

18