Proxim AP-2000 Network Parameters, Inventory Management Information, IP Configuration Parameters

Using the Command Line Interface (CLI)

Inventory Management Information

Name	Type	Values	Access	CLI Parameter
System Inventory Management	Subgroup	N/A	R	sysinvmgmt
Component Table	Subgroup	N/A	R	sysinvmgmtcmptbl
Component Interface Table	Subgroup	N/A	R	sysinvmgmtcmpiftbl

NOTE

The inventory management commands display advanced information about the AP’s installed components. You may be asked to report this information to a representative if you contact customer support.

Network Parameters

IP Configuration Parameters

Name	Type	Values	Access	CLI Parameter
Network	Group	N/A	R	network
IP Configuration	Group	N/A	R	ip (Note: The network and
				ip parameters display the
				same information)
IP Address	IpAddress	User Defined	RW	ipaddr
IP Mask	IpAddress	User Defined	RW	ipmask
Default Router IP Address	IpAddress	User Defined	RW	ipgw
Default TTL	Integer	User Defined (seconds)	RW	ipttl
		64 (default)
Address Type	Integer	static	RW	ipaddrtype
		dynamic (default)

NOTE

The IP Address Assignment Type (ipaddrtype) must be set to static before the IP Address (ipaddr), IP Mask (ipmask) or Default Gateway IP Address (ipgw) values can be entered.

DNS Client for RADIUS Name Resolution

Name	Type	Values	Access	CLI Parameter
DNS Client	Group	N/A	R	dns
DNS Client status	Integer	enable	RW	dnsstatus
		disable (default)
Primary DNS Server IP	IpAddress	User Defined	RW	dnspridnsipaddr
Address
Secondary DNS Server	IpAddress	User Defined	RW	dnssecdnsipaddr
IP Address
Default Domain Name	Integer32	User Defined (up to 254	RW	dnsdomainname
		characters)

159