Configuring Async Ports 12-17
Redirect on Busy
will redirect calls (if Y) according to the Redirection Addresses if the primary sub-
scriber device is busy.
Redirect on Out of Order
will redirects calls (if Y) according to the Redirection Addresses if the primary sub-
scribe r devic e is out of or der.
Connecti on Priority
prioritizes intra-nodal traffic; the higher the number, the higher the priority. (This pri-
ority has no effect on traffic exiting a node.)
Priorities are configured on all logical interfaces that use a physical frame relay port.
The device processor in the node uses these priorities to help determine the order in
which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
1st, 2nd,etc. Path Configured
includes or excludes the associated port as a routing path to the subscriber device. At
least one path must be specified.
Port identifies the port(s) that make up the routing path(s).
Redirection Address 0,1,etc.
are up to five subscribers that will be called according to the specified redirection
option.
Configuring Abbreviated Addresses
The Abbreviated Address operation allows you to assign a short name or mnemonic
to be used in place of the subscriber ID when making X.25 calls from a terminal con-
nected to a SmartSwitch 1800 async PAD port.
To display a list of existing abbreviated address es and their associated subscrib er ID s,
press [C] at the Connections and Routing Paths Configuration Menu (or [A], [D], [C]
from the Main Menu).
To add or change an abbreviated address, press [D] at the Connections and Routing
Paths Config urati on Men u. Wh en pr ompted , enter the a ddres s you want to use (up to
10 alphanumeric characters).
The address will be dis played; if it is an existing a ddress, the associated subscri ber ID
will also be displayed, along with the message Subscriber ID defined (or Subscriber ID
undefined if the ID is not in the database).