Cabletron Systems 1800 IPX SAP Sta tic Route P arameter s

15-18 Sm artSwit ch 1800 4.0 U ser Gui de, Rev 01
RouterIs the hex value of t he node address of t he router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file, described earlier in this chapter), this field will be ignored.
Interface
is the IPX network nu mber ass igned to the in terf ace used t o send p ack ets that are u si ng
this route.
IPX SAP Sta tic Route P arameter s
Service Type
is a SAP Service Type code. Some common types are:
0003 = print queue 0004 = file server 0005 = job server
0007 = print server 0009 = archive server 0024 = remote bridge server
Server Name
identifies a specific server in the IPX internetwork.
Server Network Address
is an IPX network number assigned to the network containing the server identified by
Server Name.
Server Node Address
identifies the IPX node attached to the server network.
Server Socket Number
is an IPX socket number that identifies the process. For example, the SAP process is
0452.
Inter ven i ng Ne tw o r ks
is the number of routers that a packet must pass through to reach the server, if this
route is used.
Table 15 -11 IPX S AP Stat i c Route P arame ters
Param eter Val id Val ues Default V a l ue
Servi ce Type 0–655 35 0
Server Name 1-48 characters asterisk (wildcard)
Server Network Address 1–fff ffffe (4 bytes) 0000000 1
Server Node Address 1–fffffffffffe (6 bytes) 0000000 00001
Server Socke t Numbe r 0–ffff 0000
Inter ven i ng Ne two r k s 1–65535 1
Router 1–fffffffffffe (6 bytes) 0000000 00001
Interface 0–6 5535 0