22-6 Smart Switch 1800 4. 0 User Guide , Rev 0 1
305. RLP Msg Queued exceeded T:“n” C: “n”
Severity: 4
Meaning: The RLP statistic Number of Queued Messages has exceeded the
threshold (T:“n”) that was set by the user. (C: “n” is the current
value .)
Action: If this happens frequently, you may need to reroute some traffic.
306. RLP Rcv Frm/Sec exceed ed T:“n” C:“n”
Severity: 4
Meaning: The RLP statistic Received Frames/Sec (*100) has exceeded the
threshold (T:“n”) that was set by the user. (C: “n” is the current
value .)
Action: If this happens frequently, you may need to reroute some traffic.
307. RLP Trn Frm/Sec exceed ed T:“n” C:“n”
Severity: 4
Meaning: The RLP statistic Transmitted Frames/Sec (*100) has exceeded the
threshold (T:“n”) that was set by the user. (C: “n” is the current
value .)
Action: If this happens frequently, you may need to reroute some traffic.
308. RLP Rej Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The RLP statistic Rejected Frames/Sec (*100) has exceeded the
threshold (T:“n”) that was set by the user. (C: “n” is the current
value .)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
309. RLP Rtrn Frm/S exceed ed T:“n” C:“n”
Severity: 4
Meaning: The RLP statis tic Retransmitted Frames/Sec (*100) has exceeded the
threshold (T:“n”) that was set by the user. (C: “n” is the current
value .)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
311. Rcv Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic Received Frames/Sec (*100) has exceeded the
threshold (T:“n”) that was set by the user. (C: “n” is the current
value .)
Action: If this happens frequently, you may need to reroute some traffic.