Cabletron Systems 1800 Table 14 -3 X.25 I P Inter face Pa rame t ers

14-8 Smart Switch 1800 4. 0 User Guide , Rev 0 1
1Y for new interfaces, N for interfaces already configured when the current release of
SmartSwitch 1800 software is installed.
2255.255.255.255 is valid only on a point-to-point interface.
3The default va lue of N etwork Mask will be configured automatically, to reflect the
appropriate address class, after the Source IP Address i s specified.. If the interface is
configured as unnumbered (and, therefore, no Source IP Address is configured), the
defa ul t va l ue of
Network Mask wil l be taken from the numbered interface that is
assigned. If a Source IP Address is specified/c hanged, the Network Mask
will automatically change to a default value appropriate
for the new address. For this reason, configure the Source
IP Addre s s first, then the Network Mask.
4These addresses must also be configured in Subscriber reco rds (described on page 8-20),
and cannot contain wildcards. In the record for the Source Subscriber, do not configure
any Routing Path. In the record for the Destination Su bscriber, configure 1st Routing
Path
as the node, RLP (only if FRX6000 or FRM), and X.25 port that will be used for
the physical interface. (On an FRX6000 or FRM, that RLP does not need to be the same
one that ha s IP in stall ed.)
Table 14 -3 X.25 I P Inter face Pa rame t ers
Parameter Valid Values Default Value
Maximum Transmission Unit 1–4096 409 6
Routing Metric Count 0–255 0
ICMP Redir ects Y/N Y
RIP Support 0 (Enabled), 1 (Rcv only),
2 (Disabled) 0 (Enabled)
RIP Flash Updates (sec) 5–300 10
RIP Full Updates (sec) 10–300 30
Priorit y 0–9 5
Bandwidth Allocation Group 1–16 1
Interface Type X.2 5 n/a
Destination IP Address 1.0.0. 0–223.2 55.25 5.255 none
Unnumbered Interface Y/N see note 1
Source IP Address 1.0.0. 0–223.2 55.25 5.255 none
Network Ma sk 255.0.0 .0–25 5.255 .255.255 2255.0.0.0 3
Source Subscriber valid subscriber address 4none
Destination Subscriber valid subscriber address 4none
SVC Retry Timer (sec) 5–60 20
SVC Idle T imer (min) 0–5 1
Max VCs to Establish 1– 8 1
PVC Connection Y/N N