11-8 Smart Switch 1800 4. 0 User Guide , Rev 0 1
Configuring Subscriber Addresses
This operation configures the called and calling addresses that will be used in call
setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses), press [A] at the Con nec tio ns an d
Routing Paths Menu (or [A ], [D], [A] from the Main Menu).
To add or change a Subscriber ID, press [B] at the Co nnecti ons and R o uting Paths
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
descri be d on p age 8- 21.)
Figure 11-3 Typical SVC Subscriber Screen
[A],[D],[B]
from Main Menu
Pressing [G] will display routing paths, which link the subscriber with one or more
ports. Pressin g [H] will display the addresses used for call redirection. (These
addresses are valid only if Y is specified for one or more of items C, D, and E on the
first screen.) Parameters for all three screens are described following Table 11-2.
Node Name=nodexyz
SVC Subsc r ib er Maintena nc e
* Subscriber ID 0100012345
A Sub scriber Name sub1
B Routing Algor ithm 0, Round Rob in
C Systematic Redirection N
D Redirect on Busy N
E Redirect on Out of Order N
F Connection Priority 0
G Routing Paths
H Redirectio n Add resses
Option: