Configuring Async Ports 12-15
Configuring Subscriber Addresses
This operation creates records for the calle d and calling addresses that will be used in
call setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses ), press [A] at the Connectio ns an d
Routing Paths Menu (or [A], [D], [A] from the Main Menu).
To add or change a Subscriber record, press [B] at the Co nnections and Routing Paths
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
described on page 8-21.
Figure 12-3 Typical SVC Subscriber Screen
[A],[D],[B] from Main Menu
Pressing [G] will display routing paths, which link the subscriber with one or more
ports. Pressing [H] will display the addresses used for call redirection. (These
addresses are valid only if Y is specified for one or more of items C, D, and E on the
first screen.) Parameters for all three screens are described following Table 12-4.
Node Name=nodexyz
SVC Subscri ber Maint en a nc e
* Subscriber ID 0100012345
A S ubscri be r Name sub1
B Routing Al gor i t hm 0, Round Robi n
C S ystematic Redirection N
D R edirect on Busy N
E R edirect on Out of Order N
F C onnecti o n Pr io rity 0
G Routing Paths
H R ed ir ecti on Add ress es
Option: