Introduction to System Op eration 18-3
GUnquiesce a Port – Cancels the Qu iesce a Port command (only if there are
still active connections on the port).
HUnquiesce a Range of Ports – Unquiesces a specified group of same-type
ports.
C On-Line Database Operations – (Chapter 19) backs up database and/or system
files locally or remotely.
ABack up the Current Database to a Remote FRX6000
BBack up the Current Database to a Remote FRX4000/SmartSwitch 1800
CRestore the Backed-Up Database to a Remote FRX4000/SmartSwitch 1800
DBack up the Database to a Local Directory
ERestore the Database from a Local Directory
FBack Up the Current System Files to a Local Directory
GRestore the System Files from a Local Directory
DTest X.25 Address Translation Templates – (Chapter 8) Tests templates to
assure they were correctly created.
ERe-Load Initialization to Async Console – (Chapter 19) Sends default terminal
settings to an Auxiliary Console on the node's Console port.
FIP Ping Connectivity Test – (Chapter 19) Uses the Ping function to determine
whether an IP host is reachable.
G On-Line SDLC PU Operations (Ch apter 9)
ADisable an SDLC PU – Takes a ny SDL C PU in the no de off l ine.
BDisable a Range of SD LC PUs – Tak e s a grou p of PUs off line.
CEnable an SDLC PU – Brings any SDLC in the node on line.
DEnable a Range of SDLC PUs – Brings a gr oup of P U s on line .
HNetView Access – (Appendix D) allows a NetView manager to obtain
infor matio n on the no de via NMV T comma nds or fr om files i n the node
database.
I CSU/DSU Tests – (Chapter 19) (valid only if the internal CSU/DSU port is
installed).
ASelf Test – transmits a test pattern to the analog portion of the circuitry and
loop the pattern back to itself.
BPattern Generation Test – transmits a PRBS (pseudo-random bit sequence)
test pattern to the remote device, which will loop the signals back.
J Frame Relay Backup Operations – (Chapter 19) allows manua l switchin g from
a primary frame relay DLCI to its back up, or fro m the back up to th e primary.
AInitiate Switching Primary DLCI Over to its Backup
BInitiate Switching DLCI Back to the Primary
C Status Displays (Chapter 20)
ANode Status – displays performance and link status for the node.
BPort Status – displays port type, operational status, and link states for all ports
on the node.
CVirtual Connections – displ a ys DLCI s / L CNs, li nk stat es, su bs c riber s, and
(frame relay only) performance for all logical connections.
DPort Signals – displays configuration data for each port in the node, and shows
on/off status of each signal at the interface.
E Traffic Monitor
APort Monitor – displays control an d information data of all level-3 p ackets
passing through a specified port.
BLAN Capture Status and Control M enu – allows configuration of parameters
that specify information to be captured when monitoring LAN traffic.
CLAN Cap t ure Review – displays captured L AN monitor information.