18-4 Smart Switch 1800 4. 0 User Guide , Rev 0 1
F Protocol Status
AIPX RIP Table Display – displays the conten ts of the RIP table.
BIPX SAP Table Display – displays the contents of the SAP table.
CSDLC PU Status – displays a list of configured station addresses for a
specified SNA p ort, including current a ctive/inactive states.
D Bridge Status Displays
ABridge Port Status Display – displays a list of Bridge ports, including
type, active status, bridge state (forwarding, listening, etc.), and number
of bytes received and transmitted.
BBridge Forwarding Table Display – displays a list of MAC addresses and
their associated bridge ports, plus any flags that have been set.
EFrame Relay Backup Status – displays the current state of frame relay
primary and backup DLCIs.
A Display States for all Backup DLCIs on a Port
B Display States for all Primary DLCIs on a Port
C Display States for all Backup DLCIs in a Group
FLLC/2 Session Status – displays addresses and operational states of all
current LLC 2 sessions.
G IP Status Displays
AIP Routing Table Display – displays interfaces, destinations, network
masks, a nd fl ags.
BIP ARP Table Display – displa ys ARP IP ad dresse s , MAC ad dresse s , and
aging timers.
CIP Interfaces Display – displays interface names, MTU values, network
names, mas ks, IP and remo te addresses, a nd flags.
HVoice IInterfaces Display – displays configured Voice interfaces.
DEvents – (Chapter 22) Displays event (alarm) messages as they occur.
E Statistics (Chap t er 21)
A Configure RLP / Port Thre s holds – allows creation of a threshold for a statistic
that, when crossed, will cause an alarm to be generated.
B Display RLP / Port / Frame Statistics – displays the supported statistics for the
specified component, showing current values, as well as the highest values
reached by each statistic since the node was last booted or since maximum
values were last cleared.
CDisplay IP Statistics – displays the su pported statistics, including current values
and cumulative values since maximum values were last cleared.
DDisplay ICMP Statistics – displays the supported statistics, including current
values and cumulative values since maximum values were last cleared.
EDisplay IP Interface Statistics – displays the supported statistics, including
current values and cumulative values since maximum values were last
cleared.
FDisplay IPX Interface Statistics – displays the supported statistics, including
current values and cumulative values since maximum values were last
cleared.
GDisplay LAN Card Interface Statistics – displays the supported statistics,
including current values and cumulative values since maximum values
were last cleared.
HDisplay Frame Relay Utilization Statistics – dis pl ays CIR, BE, and BC values for
a specified DLCI, as well as the configured and actual percentages of
bandwidth use by each bandwidth allocation group.
I Display Voice Statistics
ADisplay Voice Application Statistics – displays data on calls received,
transmitted, cleared, and accepted, as well as busy and time-out statistics.