Konica Minolta 750 manual Application Functions Chapter

Application Functions 8

9Touch the button for the desired number of repeats.

–2 Repeat: Two copies of the original are printed on a single sheet of paper. Specify the desired setting for “Repeat Interval Setting” to specify the distance from the center of the paper to each copy im- age.

–4 Repeat: Four copies of the original are printed on a single sheet of paper.

–8 Repeat: Eight copies of the original are printed on a single sheet of paper.

–If specify the distance from the center of the paper to each copy im- age after selecting “2 Repeat”, continue with step 10.

–If “4 Repeat” or “8 Repeat” was selected, continue with step 12.

10 Touch [Repeat Interval Setting].

–Touch [-] and [+] or use the keypad to specify the width of the shift.

–Touch [↔] to switch between the integer and the fraction, touch [–] and [+] to specify the dimensions, and then touch [OK].

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

Application Functions Chapter 8

bizhub 750/600 8-49