Konica Minolta 750 manual Before Making Copies, Part Name Description

Before Making Copies

2

No.	Part Name	Description
1	ADF (automatic document feeder)	Automatically feeds one original sheet at a time for
		scanning. If the double-sided original setting is se-
		lected in the touch panel, the original is automatical-	2
		ly turned over so that both sides can be scanned.
			Chapter
		Referred to as the “ADF” throughout the manual.
2	Toner cartridge door	Opened when replacing the toner cartridge (See
		p. 9-4.)
3	Working table	Provides an area to temporarily place original and
		other materials	Copies
4	Sub power switch	Use to turn on/off machine operations, for example,
		for copying, printing or scanning. When turned off,
		the machine enters a state where it conserves ener-
		gy.	Making
5	Multiple bypass tray	transparencies or trace paper
		Used when printing onto paper with a size not load-
		ed into a paper tray or onto overhead projector
		Holds up to 100 sheets of plain paper and 1 sheet	Before
		Referred to as the “bypass tray” throughout the
		of overhead projector transparencies or trace pa-
		per.
		manual. (See p. 2-44)
6	Right-side door of the paper tray	Opened when clearing paper misfeeds
7	Tray 4	Can be loaded with up to 500 sheets of paper (20lb),
		and can be set to different paper sizes (See p. 2-41.)
8	Tray 3	Can be loaded with up to 500 sheets of paper (20lb),
		and can be set to different paper sizes (See p. 2-41.)
9	Tray 2	Can be loaded with up to 1,000 sheets of paper
		(20lb) (See p. 2-39.)
10	Tray 1	Can be loaded with up to 1,500 sheets of paper
		(20lb) (See p. 2-39.)
11	Touch panel	Displays various screens and messages.
12	Control panel	Used to specify the various machine settings (See
		p. 2-14.)
13	Front doors (left and right)	Opened when clearing paper misfeeds
14	Exit tray	Collects printed pages

Note

The maximum angle that the ADF is opened can be adjusted in two stag- es. For details, contact your technical representative.

bizhub 750/600 2-3