Konica Minolta 750 manual Copy Paper/Original Chapter

7

Copy Paper/Original Chapter 7

Copy Paper/Original

3Touch [Oversized Paper].

–The Paper Size screen that appears differs depending on the paper size type that is selected.

Buttons for the available paper sizes appear.

4Select the size of the paper to be loaded.

–Touch [X] or [Y] in “Change size”, touch [↔] to switch between the integer and the fraction, and then touch [–] and [+] to specify the size of the paper.

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

–If a decimal value is displayed in the screen and the specified value is outside the allowable range, the message “Input Error” appears. Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value.

5

6

Select the desired image position.

Touch [OK].

7-30 bizhub 750/600