Konica Minolta 750 manual Positioning the Original, To position the original into the ADF

Basic Copy Operations 3

3.3Positioning the Original

The original can be fed in either of the following two ways. Be sure to position the original correctly according to the type of original being copied.

Document Feed Method	Features
Using the ADF	By using the ADF, a multi-page original can be fed
	automatically. This feed method can also be used with
	double-sided original, and is perfect for multi-page double-
	sided original.
Using the original glass	The document is placed face down directly on the original
	glass, then scanned. This method is best with books and
	other documents that cannot be fed through the ADF.

To position the original into the ADF

0For details on the types of original that can be loaded into the ADF, refer to “Originals” on page 7-33.

0Do not load original that are bound together, for example, with paper clips or staples.

0Do not load more than 100 sheets or so many sheets that the top of the stack is higher than the , mark, otherwise an original misfeed or damage to the original or machine may occur. However, an original that exceeds 100 pages can be scanned in separate batches. For details, refer to “Scanning the Original in Separate Batches (“Separate Scan” Setting)” on page 3-11.

0If the original is not loaded correctly, the original may not be fed in straight or an original misfeed or damage to the original may occur.

1Position the original face up in the ADF.

–Position the original pages so that the top

of the original is to- ward the back or the right side of the ma- chine.

Basic Copy Operations Chapter 3

bizhub 750/600 3-7