Konica Minolta 750 Specifying Control Panel Settings Accessibility Mode, Simple Troubleshooting

		Introduction
4.7	Specifying Control Panel Settings (Accessibility Mode)	..............4-23
	Displaying the Accessibility Setting Screen	4-23
	To set the “Key Repeat Start/Interval Time” function	4-23
	To set the “Enlarge Display Timer Setting” function	4-26
	To set the “Message Display Time” function	4-28
	To set the “Accept Sound Setting” function	4-30
	To set the “Touch Panel Volume Adjust” function	4-33
	To set the “Touch Panel Adj.” function	4-35

5Troubleshooting

5.1When the Message “Malfunction detected.” Appears

	(Call Technical Representative)	5-2
	Display in Enlarge Display Mode	5-2
	To call the technical representative	5-3
5.2	When the Message “Misfeed detected.” Appears	5-5
	To clear a paper misfeed	5-6
5.3	When the Message “Replenish paper.” Appears	5-8
	To replenish paper	5-8

5.4When the Message “... Not enough remaining memory.”

	Appears	5-9
	Memory Becomes Full While Scanning	5-9
	Memory Becomes Full While Queuing a Job	5-10
5.5	Simple Troubleshooting	5-11
	Main body	5-11
	ADF	5-13
	Finisher	5-14
5.6	Main Messages and Their Remedies	5-15

6Specifications

6.1	Specifications	6-2
	bizhub 750/600	6-2
	ADF	6-3
	Option Specifications	6-5
	Large Capacity Tray LU-401	6-5
	Large Capacity Tray LU-402	6-5
	Finisher FS-504	6-6
	Finisher FS-602	6-6
	Punch Kit PK-505	6-7
	Z-Folding Unit ZU-602	6-8
	Cover Sheet Feeder PI-501	6-8
	Shift Tray SF-601	6-8
	Accessories	6-9
x-8		bizhub 750/600