Konica Minolta 750 manual Application Functions Chapter

Application Functions

5Touch [Image Repeat].

8

The Image Repeat screen appears.

6Select the layout method.

7Touch [Auto Detect].

–If you wish to specify the scanning area, touch [Set Range], and then specify the size of the scanning area. For details on specifying a size, refer to “To repeat the specified area (“Set Range”)” on page 8-43.

–When the original is positioned into the ADF, the original size is au- tomatically detected when the [Start] key is pressed, so no original size appears under “Scan Range”.

–If [Auto Detect] was selected, the number of repeats is also auto- matically specified. To specify the desired number of repeats, refer to “To repeat the image the specified number of times (“Repeat”)” on page 8-47.

–To cancel changes to the settings, touch [Cancel].

–To cancel the “Image Repeat” function, touch [OFF].

The scanning area is detected, and the size appears under “Scan Range”.

8Check the scanning size under “Scan Range”, touch [OK], and then touch [OK] in the next screen that appears.

Application Functions Chapter 8

bizhub 750/600 8-41