Konica Minolta 750 manual Application Functions Chapter

14

15

16

Touch [OK].

11

If necessary, specify any other copy settings.

Using the keypad, type in the desired number of copies. Press the [Start] key.

If the distance between repeats was specified, the Repeat screen ap- pears again.

12 Touch [OK] three times.

13 In the Basic screen, touch [Paper], and then select the paper tray load- ed with the paper.

8

Application Functions Chapter 8

Application Functions

–When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting.

If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.

–To specify no distance, touch [No Shift].

8-50 bizhub 750/600