Konica Minolta 750 manual Specifying User Settings, System Setting, Language Selection

12 Utility

12.3Specifying User Settings

This section describes the main parameters and operations that can be per- formed after pressing the [Utility/Counter] key, then touching [2 User Set- ting].

System Setting

Language Selection

	Description			Settings (Default set-
				tings are underlined.)
	Select the language of the Touch Panel messages.			English/French/Spanish/
				Japanese
	Measurement Unit Setting
	Description			Settings (Default set-
				tings are underlined.)
	Select one of the measurement units in which values are displayed			mm (Numerical Value)/
	in the touch panel.			inch (Numerical Value)/
				inch (Fraction)
	Paper Tray Setting
	Parameter		Description	Settings (Default set-
12
				tings are underlined.)
Chapter	Paper	Paper	Select one of the types for paper loaded	Normal/ Thick Paper/
	Type	Type	into each paper tray.	Thin Paper/ Custom 1/
				Custom 2/
				Custom 3/ Tab Paper/
				Recycled/ Colored Pa-
				per/Special Paper/ Fine/
Utility				Label/ Letterhead
		Paper Size	Select one of the following sizes for pa-	Standard Size 1/
			per loaded into the tray 3 and 4.	Standard Size 2/
			• Standard Size 1: The size of standard-	Custom Size/
			sized paper is automatically detected.	Oversized Paper
			• Standard Size 2: Select when loading
			paper of the following sizes: A4 w , A5
			v, F4.
			• Custom Size: Select when using cus-
			tom-sized paper.
			• Oversized Paper: Select when paper
			larger than a standard size is being
			used.

12-14 bizhub 750/600