5

Troubleshooting Chapter 5

 

 

Troubleshooting

 

 

 

Symptom

Possible Cause

Remedy

There are dark specks or

Is the original glass dirty?

Wipe the glass with a soft, dry cloth.

spots throughout the

 

(See p. 10-3.)

printed output.

 

 

Is the left partition glass dirty?

Wipe the glass with a soft, dry cloth.

There are streaks in the

printed output.

 

(See p. 10-3.)

 

Is the ADF platen guide cover

Wipe the ADF platen guide cover

 

dirty?

with a soft, dry cloth. (See p. 10-4)

 

 

 

 

Was the original document

Place a blank sheet of paper on top

 

printed on highly translucent

of the document. (See p. 3-9.)

 

material, such as trace paper

 

 

or overhead projector trans-

 

 

parencies?

 

 

 

 

 

Is a double-sided document

If a thin double-sided document is

 

being copied?

being copied, the information on the

 

 

back side may be reproduced in the

 

 

copy. Touch [Lighter] on the Back-

 

 

ground Removal screen to select a

 

 

lighter background density. (See

 

 

p. 3-49.)

 

 

 

The image is not aligned

Is the document incorrectly

Correctly position the document

properly on the paper.

positioned?

against the document scales. (See

 

 

p. 3-9.)

 

 

Load the document into the ADF,

 

 

and slide the adjustable document

 

 

guides to fit the size of the docu-

 

 

ment. (See p. 3-7.)

 

 

 

 

Is the document incorrectly

If the document cannot be fed cor-

 

positioned in the ADF?

rectly through the ADF, make cop-

 

 

ies by positioning the document on

 

 

the original glass. (See p. 3-9.)

 

 

 

 

Is the original glass dirty

Wipe the glass with a soft, dry cloth.

 

(while using the ADF)?

(See p. 10-3.)

 

 

 

 

Are the adjustable document

Slide the document guides against

 

guides incorrectly positioned

the edges of the document.

 

against the edges of the doc-

 

 

ument?

 

 

 

 

 

Was curled paper loaded into

Flatten the paper before loading it.

 

the paper tray?

 

 

 

 

The printed page is

Was paper that curls easily

Remove the paper from the paper

curled.

(as with recycled paper)

tray, turn it over, and then load it

 

used?

again.

 

 

 

 

 

Replace the paper with paper that is

 

 

not damp.

 

 

 

5-12

bizhub 750/600

Page 223
Image 223
Konica Minolta 750 manual There are dark specks or Is the original glass dirty?