Konica Minolta 750 manual Before Making Copies Turn on the sub power Switch, Detail

Before Making Copies 2

3Turn on the sub power

switch.

!

Detail

When the control panel is turned on by using the sub power switch, the indicator on the [Start] key lights up in orange, and a screen indicating that the machine is starting up appears.

After a few seconds, the message “Now warming up. Ready to scan.” ap- pears on the touch panel, and the indicator on the [Start] key lights up in green, indicating that a job can now be queued.

!

Detail

The default settings are those that are selected immediately after the ma- chine is turned on (the power switch is set to “I”) and before any setting is specified from the control panel or touch panel, and those that are se- lected when the [Reset] key is pressed to cancel all settings specified from the control panel or touch panel. The default settings can be changed. For more details, refer to “Initial Setting” on page 12-20.

The factory default settings are the settings that were selected when this machine was sent from the factory.

Before Making Copies Chapter 2

Note

A job can also be queued while the machine is warming up after the sub power switch is turned on. For details, refer to “To scan during warm-up” on page 2-24.

bizhub 750/600 2-23