Konica Minolta 750 manual Interrupting a Copy Job Interrupt Mode, To interrupt a copy job

Additional Copy Operations Chapter 4

4 Additional Copy Operations

4.3Interrupting a Copy Job (Interrupt Mode)

The current jobs can be temporarily interrupted so an original can be copied with different copy settings.

This is convenient for quickly making a copy.

!

Detail

For details on making a copy after printing of the current job is finished, refer to “To increase priority for printing” on page 11-18.

To interrupt a copy job

1Position the original to be copied. (For details, refer to page 3-7.)

2 Press the [Interrupt] key.
–	If a job is being print-	Interrupt
	ed, the message
	“Job is stopping.”
	appears.
The indicator on the [In-
terrupt] key lights up in
green and printing of the
current job stops.
?	What settings are se-
	lected when the [In-
	terrupt] key is
	pressed?

%When the [Interrupt] key is pressed, all functions and settings are reset to their defaults except the number of the copies.

?Why is the [Interrupt] key not available?

%The [Interrupt] key cannot be pressed while an original is being scanned.

3Select the desired copy settings.

4Press the [Start] key.

Printing begins for the job that was interrupted.

4-8 bizhub 750/600