Konica Minolta 750 manual Erase screen Center Erase screen

8

Application Functions Chapter 8

Application Functions

Erase screen

Center Erase screen

–Touch [↔] to switch between the integer and the fraction, touch [–] and [+] to specify the width to be erased, and then touch [OK].

–If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-14.

–When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting.

–If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.

–If a Book Erase function is specified, touch [Image Adjustment] in the Application screen, touch [Standard Size], and then specify the size of the original.

?What do the Book Erase functions do?

%“Erase” and “Center Erase” can be used together.

?How are settings specified for the “Erase” function?

%Refer to “Erasing Specified Areas of Copies (“Erase” Functions)” on page 8-69. In addition.

8-34 bizhub 750/600