Konica Minolta 750 manual Application Functions Chapter

Application Functions

4Touch [Erase].

8

The Erase screen appears.

5Specify the area to be erased.

–To erase the same width along all four sides of the original, touch [Frame].

–To specify a different width to be erased depending on the position, specify different settings for “Top”, “Left”, “Right”, and “Bottom”.

–To cancel changes to the settings, touch [Cancel].

–To cancel the “Erase” function, touch [OFF].

?What happens when [Frame] is selected?

%The same width is erased on all four sides of the original. The fac- tory default setting is “Frame”. If “Frame” is selected, the same width is erased on all four sides of the original.

?Can the settings be combined?

%“Frame” cannot be combined with the other settings (“Top”, “Left”, “Right” or “Bottom”).

6Touch [-] and [+] or use the keypad to specify the width to be erased.

–To specify that no part of a side is to be erased, touch [None].

–Touch [↔] to switch between the integer and the fraction, touch[–] and [+] to specify the width to be erased, and then touch [OK].

Application Functions Chapter 8

bizhub 750/600 8-71