Konica Minolta 750 manual Before Making Copies Chapter

2

Before Making Copies

4Using the keypad, type in the length of time until the machine enters Sleep mode again.

Before Making Copies Chapter 2

Specify a length of time between 5 minutes and 9 hours and 59 min- utes.

?How can a single digit be input?

%First, type in “0”. If a minutes setting of less than 5 is entered, the setting changes to 5 minutes. In addition, a minutes setting of 60 or more cannot be specified.

5Touch [OK].

Basic screen appears.

Note

As the factory default, the weekly timer is not set.

If the message “Access restricted due to weekly timer. Input amount of time prior to entering Sleep Mode.” or “Access restricted due to weekly timer. Input password to interrupt timer.” appears after the sub power switch is pressed, the weekly timer is set.

!

Detail

During the set time, the copy operations can be performed as usual.

From Administrator mode, the machine can be set so that the screen for entering the password for non-business hours is not displayed.

The default setting for the “Password for Non-Business Hours” parame- ter is “OFF” (the screen is not displayed).

2-32 bizhub 750/600