Konica Minolta 750 manual Before Making Copies Chapter

2

Before Making Copies Chapter 2

Before Making Copies

4Slide the lateral guide to fit the size of paper being loaded.

–Move the lateral

guide while holding the release button pressed. When the button is released, the guide is locked in place.

5Fully push in the paper tray.

2

Reminder

Do not load so much paper that the top of the stack is higher than the , mark.

2

Reminder

Make sure that the trailing-edge guide is adjusted to fit the size of the loaded paper.

If there is space between the trailing-edge guide and the paper or if the trailing-edge guide is not correctly positioned, the paper will not be fed correctly.

Make sure that the lateral guide is correctly positioned against the edge of the loaded paper. If the lateral guide is not positioned correctly, the pa- per size will not be correctly detected or the punched holes will not be correctly positioned.

If custom-sized paper is loaded, there may be some space between the paper and the trailing-edge guide. When loading the paper, make sure that it fits well against the right side of the paper tray, not the trailing-edge guide.

2-42 bizhub 750/600