Konica Minolta manual Bizhub 750/600 12-69

Repeat steps 6 through 11 until the desired print results are achieved.

Check the stapling positions in the sample copy.

Utility 12

5Touch [6 2 Position Staple].

The 2 Position Staple screen appears.

6Touch the button for setting to be specified.

7Touch [Test Copy].

The Test Copy screen appears.

8Press the [Start] key.

The sample copy is printed.

9Touch [Close].

The 2 Position Staple screen appears again.

10

11 If the desire print results are not achieved, change the adjustment val- ue.

–Touch [+] and [–] to adjust the distance (between 128 and 160 mm) between the staples.

12

13 Touch [OK].

–To cancel changes to the settings, touch [Cancel].

Note

Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm

Utility Chapter 12

bizhub 750/600 12-69