Konica Minolta 750 manual Selecting a Paper Setting

Basic Copy Operations Chapter 3

3 Basic Copy Operations

3.5Selecting a Paper Setting

The paper size can be selected automatically according to the original size or it can be specified manually. Specify the paper size according to the cor- responding procedure, depending on the desired copy settings.

Note

If a setting for special paper is selected for a paper tray, that tray is not selected automatically with the “Auto Paper Select” setting. (However, a paper tray set to “Single Side Only” is given priority to be selected.) This setting is useful for paper trays loaded with special paper. For details, re- fer to “To specify a setting for special paper” on page 7-20.

The default setting is “Auto Paper Select”.

For details on the operations that cannot be combined, refer to “Opera- tions That Cannot Be Combined” on page 3-5.

The “Auto Zoom” and “Auto Paper Select” settings cannot be selected at the same time. If the “Auto Zoom” setting is selected, select the desired paper size in the Paper screen.

Check the screen for the paper that is selected. Touch [Paper] to display the size and orientation of the selected paper and the amount of paper remaining. The amount of paper remaining is indicated in five levels. If special paper is selected, the special paper type is indicated with icons. For details, refer to “Icons That Appear in the Touch Panel” on page 2-18.

Automatically Selecting the Paper Size (“Auto Paper Select” Setting)

The size of the positioned original is detected, and copies are produced us- ing paper of the same size.

If the “×1.0” Zoom setting was specified, paper of the same size as the orig- inal is selected.

If the zoom ratio was increased or decreased, a paper size that corresponds to the specified zoom ratio is automatically selected.

3-26 bizhub 750/600